gakken150mod

Photo via Flickr courtesy (C) MrBook aka heurtubia aka Hector Urtubia.

A $50 synth that makes neat noises is fun. But a $50 synth that has a proper housing, audio jacks, and can be MIDI controlled — that’s a whole lot better. So readers were wowed last week as we saw the work MrBook did with his Gakken SX-150.

Now, by popular demand, MrBook shares his techniques with specs, instructions, and code. This isn’t a bad project to get started with if you’ve been thinking of doing something on these lines.

The basic ingredients and process:

  • Find the connections on the synth for audio and control, using contact points on the board
  • Build a simple circuit that adds MIDI input (control) and audio output – schematic on his site. It’s not a tough circuit at all — this could be fun soldering practice.
  • Add the Arduino, the open source, dirt-cheap, accessible microcontroller project board, and some code MrBook has written for you.

That should be fun even for relative newcomers – provided you have basic soldering chops. If you want to get more advanced, there’s room to modify the Arduino code to do fun stuff, or, as MrBook is doing, add a standalone Arduino sequencer or the like to drive your synth in hardware alone. (While I’m still on a crusade to do OSC for stuff that talks to computers, I think MIDI should absolutely be used for what it’s good add – connecting hardware.)

You can also have some fun with the casing. (Someone needs to mod the drab colors on the Gakken, too, I think.)

If you do a project and document it, do let us know! And we’ll be watching for more from MrBook.

You can get your SX-150 kit from our good friends at MAKE. (Nope, I’m not getting any cash for saying that. Hmmm… okay, I need an affiliate account, don’t I? Make?)

SX-150 synth mod instructions, schematics and code [MrBook]

  • http://www.clawjob.com mike

    Hi! I have one of these, but I don't plan on sequencing it with the computer, just using it as a hardware synth. If that's the case do I still need the Arduino? Or would the MIDI connector be enough? What do you think?

  • http://www.createdigitalmusic.com Peter Kirn

    You need the Arduino to do MIDI with anything else. ;) But that's another reason to get the Arduino *minus* the USB port… once programmed, you won't need that any more.

  • http://mrbook.org/blog MrBook

    If you want to add MIDI, you still need the Arduino, even if you won't be using the computer to sequence it. There are other options, but I using Arduino I think is the simplest.

  • http://www.clawjob.com mike

    HMM. Thanks for the quick reply! I've been thinking about getting into Arduino; maybe this'll give me the push I need.

  • http://www.createdigitalmusic.com Peter Kirn

    Be sure to check out this library. ;)
    http://ruinwesen.com/mididuino

  • http://www.clawjob.com mike

    So fancy… so fancy…

  • Michael Una

    Totally sweet. This has been on my to-do list for a while.

  • turboghetto

    Hello, I tried to do it, but I only upload this code http://mrbook.org/downloads/arduinosx150/SX150Dri
    on the arduino. Is that enough or do I need to upload other files?

  • Collin

    yup – as far as I can tell, that's all the code you'll need