meeblip_albino

What it means that the MeeBlip synth is open source hardware

The MeeBlip synthesizer project is about to reach five years old. I feel this collaboration with engineer James Grahame has been one of the most important to me and to CDM. We haven’t talked so much about its open source side, though – and it’s time. In five years, we’ve sold thousands of synths – most of them ready-to-play. The MeeBlip isn’t a board and some bag of parts, and it isn’t a kit. You don’t need a soldering iron; after our very first batch, you don’t even need a screwdriver. The MeeBlip is an instrument you can use right …

READ MORE →

This is MeeBlip anode limited edition: White Case, More Direct Control

MeeBlip anode is in a new limited edition with a white case and more hands-on control – only 250 will be made. Details, plus a jam with two anodes from Berlin’s legendary Schneidersladen.

READ MORE →
dreams

Watch a Dreamy, Groovy Reverie Played Live on Desktop Synths

Jeremy Blake (aka Jeremy Leaird-Koch) is the kind of omni-dimensional talent who that seems tailored for the age of Web media. Yes, he’s an electronic musician, but … have a listen to his SoundCloud, and you’ll find the common thread is craft more than genre. And yes, he’s also a video editor, who’s also making imaginative and dazzling visuals. Let’s instead just wander into his studio, virtually speaking, and let him play for us on a nice, assembled gathering of custom hardware. And drifting off on this chillout groove is a nice way to take a pause in your day…

READ MORE →
poppy_components

A Toe-Tapping, Dancing 3D-Printed Robot Plays Music

Making Music With Poppy from Pierre Rouanet on Vimeo. It can “learn” to tap its toe and bob its head. And then it can make sounds as you move its arms. It’s a robotic interface for music – a bit like playing with a very smart toy doll. To show off its interactive/interfacing abilities, the team behind Poppy used music. Poppy is a robot that can be produced with a 3D printer. All the hardware and software are fully open source. The idea – fused with cash from the EU’s European Research Council for funding science and creativity – is …

READ MORE →
radiothing

Put a Radio in Your Modular: Music Thing Radio Music

Once upon a time, musicians made music from the sound content pouring invisibly, inaudibly from the air. The likes of John Cage and Kalrheinz Stockhausen turned the radio into stochastic source and instrument, a means of making music in the now. And now, you can, too, in the latest Eurorack module. Whether you want a modular or not, this is one module you definitely don’t need. You don’t need to act out Cage-ian fantasies and turn your local hit FM station greatest tracks of the 80s and 90s into an experimental noise performance. Nor do you really need to understand …

READ MORE →
anodewithmixer

MeeBlip anode Adds Edgy Wavetables; Here’s How They Sound

We have reached a wonderful place. It’s a world where we no longer treat digital and analog as simplistically better or worse, but as techniques, as colors, a spectrum of tools for exploring sound. Or to put it another way, we now make wild noises however we want. And that’s very much how I feel about the direction we’ve gone with MeeBlip anode, combining digital waveforms with analog filtering, which is why I’m keen to share it here on CDM and not just via the MeeBlip site. The new 2.0 firmware comes with a selection of 16 wavetables, covering a …

READ MORE →

There’s an Unofficial Eurorack Version of MeeBlip anode

You can’t buy it – it’s a one-of-a-kind model – but someone was enough in love with the sound of MeeBlip anode that they built their own modular version.

READ MORE →

Vectr, the Wave-your-hands Analog Module, Just Got Crowd-funded

Wriggle your fingers above the light-up glow of the Hackme Vectr, and you can control sounds in space. The results are good for spooky sonic exploration – a less-temperamental Theremin – and apparently have inspired sound lovers, because the project reached its first crowd-funding goal. Through Thursday morning, January 9, you can get your own Vectr for about US$299-325 (or a fancy special edition for $399), estimating shipping in May. In this initial design, the focus is on analog control: 3-axis gestural control with LED feedback 30-second gesture sequence recording Sequence gesture playback, itself controlled by gestures It’s especially nice …

READ MORE →

littleBits Open Source Synth Kit on GitHub; KORG Filter Secrets Revealed, Music Projects

Open source music hardware has gone from promising concept to practical reality. It incorporates not just hacker-friendly kits, but end user products, from synths to controllers to effects. And now, for the first time, you can find one of the biggest names in the musical instrument industry on GitHub. KORG and littleBits promised they’d release their collaboration under the same open source license as the other magnetic, snap-together modules from littleBits. This week, they’ve delivered. It’s a little tricky to find, so let’s walk you through it. The good stuff is in the EAGLE files – the circuit diagrams, here …

READ MORE →

Digital Warrior Goes Open Source, DJ-friendly Step Sequencer Hardware Gets Better

A USB-connected step sequencer with controller is now improved, and open source. The Digital Warrior is a boutique hardware controller hailing from Cyprus, combining a 16-voice, 32-step sequencer with four pots and two three-color endless encoders, all attached via a driverless USB connection. It’s capable of acting as a step sequencer/controller with any tools you like, but out of the box includes support for Traktor remix decks and Ableton Live control. The remix deck functionality with Traktor is a particular draw; developer and producer/DJ Tomash GHz pioneered this particular way of combining step sequencers and Traktor’s Remix Decks. (Check out …

READ MORE →